Horizontal Bar Profile forming Machine
Equipment applicable raw material specifications and materials: Q700 high-strength steel coil material, thickness 1.0mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
- Product Introduction
Foshan Yilaite Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of horizontal bar profile forming machine in China, also supports high quality customized service. With abundant experience, we warmly welcome you to buy advanced horizontal bar profile forming machine from our factory.
Device Function
Equipment applicable raw material specifications and materials: Q700 high-strength steel coil material, thickness 1.0mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
The equipment is equipped with a human-machine interface operating system, which can input production plans and output registration, and the length parameters can be adjusted.
Operating instructions: The coil material is manually lifted onto the upper material turntable. After selecting the automatic mode, the work button switch is activated.
Equipment Parameters
| Item | Specification |
|---|---|
| Inner hole diameter | 460~520mm |
| Discharge width | 200mm |
| Discharge diameter | 1200mm |
| Load weight | 3000kg |
| Using manual core expansion | Using manual core expansion |
| No power transmission | No power transmission, with brakes |
| Quantity | 1 piece |
| Applicable material | Hot rolled coil material |
| Material thickness | 1.0mm |
| Main motor power | 7.5kW (servo motor) |
| Forming speed | 6-8m/min |
| Number of molding groups | 16, straightening 5 |
| Forming roller material | CR12MOV |
| Roll heat treatment hardness | HRC57 ° -59 ° |
| Precision machining | Precision machining of inner and outer diameters after heat treatment of rolling mill |
| Shaft diameter and material | ￠48mm, 45# steel, finely ground outer circle after quenching and tempering. |
| Main bearing | 6208 |
| Forming shaft seat | side plate, plate thickness 30mm |
| Transmission method | gear transmission |
| Machine structure | The machine adopts 100 * 80 square tube welding and flat plate processing |
| Forming mechanical dimensions | approximately L * W * H 6m * 0.8m * 1.2m |
| Net weight of the machine | approximately 4 tons |
| Voltage | 380V/3phase/50 Hz |
| Hydraulic system | One set of hydraulic system, 4KW hydraulic motor, three workstations |
| Punching and cutting molds | 2 sets of punching molds and 1 set of cutting molds |
| Mold material | CR12MOV |
| Processing hardness | HRC60 ° -62 ° |
| Cutting method | Using online encoder to detect shutdown and cutting off |
| Flat table length | 1 meter |
| Flat table structure | The flat table structure is composed of angle iron |
| Unloading method | Using manual unloading |
| Control system | Using PLC human-machine interface control |
| Main electrical components | The main electrical components are made by Schneider |
| Length measurement | The length is calculated using an internal encrypted encoder |
| Electric control box | The electric control box adopts a fully sealed ventilation cooling device |
| Control system power supply | The control system power supply adopts overload protection |
| Cutting method | Adopting the shutdown and cutting off method |
| Voltage | 380V 50Hz |
Hot Tags: horizontal bar profile forming machine, China horizontal bar profile forming machine manufacturers, suppliers, factory
