U-Channel Roll Forming Machine
Equipment applicable raw material specifications and materials: roll material, thickness 1.5mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
- Product Introduction
Foshan Yilaite Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of u-channel roll forming machine in China, also supports high quality customized service. With abundant experience, we warmly welcome you to buy advanced u-channel roll forming machine from our factory.
Device Function
Equipment applicable raw material specifications and materials: roll material, thickness 1.5mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
The equipment is equipped with a human-machine interface operating system, which can input production plans and output registration, and the length parameters can be adjusted.
Operating instructions: The coil material is manually lifted onto the upper material rack, and the material is manually guided into the forming machine and fed into the cutting die. After selecting the automatic mode, the work button switch is activated.
Equipment Parameters
| Item | Specification |
|---|---|
| Inner hole diameter | 460~520mm |
| Material width | maximum width 600mm |
| Loading capacity | 10,000 kg |
| Quantity | 1 piece |
| Hydraulic automatic core expansion | Hydraulic automatic core expansion |
| Electric uncoiling | Electric uncoiling |
| Applicable Material | Q700 High-Strength Steel Coil |
| Material thickness | 1.5mm |
| Total power of the main motor | 30kW |
| Forming speed | 1-15 m/min |
| Forming Group Count | 28 sets, straightening 5 sets (Shaft seat memorial archway structure, transmission: each group with a separate gearbox transmission) |
| Forming roll material | CR12MOV |
| Roll heat treatment hardness | HRC 58°-60° |
| Precision machining | Precision machining of the inner and outer diameters after heat treatment of the roller |
| Shaft diameter and material | ￠80mm, 40Cr steel, precision ground after quenching and tempering |
| Main bearing | NJ212/6212 |
| Axle housing | Memorial archway structure |
| Transmission method | Each group with a separate gearbox transmission |
| Width adjustment method | Set width, one click overall width adjustment |
| Machine structure | The machine adopts steel plate welding and flat plate processing |
| Forming mechanical dimensions | approximately LWH17m2.1m1.4m |
| Net weight of the machine | approximately 25 tons |
| Voltage | 380V/3phase/50 Hz |
| Hydraulic system | One set of hydraulic system, hydraulic motor 7.5KW, one workstation oil cylinder |
| Waste cutting molds | 1 set of waste cutting molds |
| Mold material | CR12MOV |
| Processing hardness | HRC60 ° -62 ° |
| Cutting method | Using online encoder to detect non-stop servo cutting off |
| Flat table length | 6 meters |
| Flat table structure | The flat table structure adopts channel steel welding and drum type |
| Unloading method | Using manual unloading |
| Control system | Adopting PLC human-machine interface control |
| Main electrical components | The main electrical components are made by Schneider |
| Electric control box | The electric control box adopts a fully sealed ventilation cooling device |
| Control system power supply | The control system power supply adopts overload protection |
| Voltage | 380V 50Hz |
Hot Tags: u-channel roll forming machine, China u-channel roll forming machine manufacturers, suppliers, factory
