End Plate forming Machine
Equipment applicable raw material specifications and materials: galvanized coil material, thickness 2.0mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
- Product Introduction
Foshan Yilaite Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of end plate forming machine in China, also supports high quality customized service. With abundant experience, we warmly welcome you to buy advanced end plate forming machine from our factory.
Device Function
Equipment applicable raw material specifications and materials: galvanized coil material, thickness 2.0mm.
The specific dimensions of the production model shall be subject to the customer's drawings.
Choose material CR12MOV for the forming wheel.
The equipment is equipped with a human-machine interface operating system, which can input production plans and output registration, and the length parameters can be adjusted.
Operating instructions: The coil material is manually lifted onto the upper material turntable. After selecting the automatic mode, the work button switch is activated.
Equipment Parameters
| Item | Specification |
|---|---|
| Inner hole diameter | 460~520mm |
| Discharge width | 200mm |
| Discharge diameter | 1300mm |
| Load weight | 1000kg |
| Using manual core expansion | Using manual core expansion |
| Power | 3KW transmission |
| Quantity | 1 piece |
| Applicable materials | High strength sheet coil material |
| Material thickness | 2.0mm |
| Main motor power | 11kW (servo motor) |
| Forming speed | 1-12m/min |
| Number of molding groups | 14, straightening 1 |
| Forming roller material | CR12MOV |
| Roll heat treatment hardness | HRC57 ° -59 ° |
| Precision machining | Precision machining of inner and outer diameters after heat treatment of rolling mill |
| Shaft diameter and material | ￠58mm, 45# steel, finely ground outer circle after quenching and tempering. |
| Main bearing | 6210 (double bearing) |
| Shaping shaft seat | main, auxiliary: memorial archway 6210mm |
| Transmission mode | Each group is driven by a separate gearbox |
| Machine structure | The machine adopts steel plate welding and flat plate processing |
| Forming mechanical dimensions | approximately L * W * H8.5m * 1.5m * 1.2m |
| Net weight of the machine | approximately 12 tons |
| Voltage | 380V/3phase/50 Hz |
| Hydraulic system | One set of hydraulic system, hydraulic motor 7.5KW, two workstation oil cylinders |
| Punching and cutting molds | 1 set of punching molds with 9 holes and 1 set of cutting molds with waste materials |
| Mold material | CR12MOV |
| Processing hardness | HRC60 ° -62 ° |
| Cutting method | Usin |
Hot Tags: end plate forming machine, China end plate forming machine manufacturers, suppliers, factory
